2018 CCR Report

“2018” Annual Drinking Water Quality Report

Town of Hookerton”

Water System Number 04-40-020”

 

:

 

We are pleased to present to you this year's Annual Drinking Water Quality Report. This report is a snapshot of last year’s water quality. Included are details about your source(s) of water, what it contains, and how it compares to standards set by regul atory agencies. Our constant goal is to provide you with a safe and dependable supply of drinking water. We want you to unders tand the efforts we make to continually improve the water treatment process and protect our water resources. We are committed to ensuring the quality of your water and to providing you with this information because informed customers are our best allies.  If you have any questions about this report or concerning your water, please contact Tyler Shirley at 252-747-3816. We want our valued customers to be informed about their water utility. If you want to learn more, please attend any of our regularly scheduled meetings at town hall the first Tuesday of each month at 7:00 PM.

 

What EPA Wants You to Know

 

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. T he presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency's Safe Drinking Water Hotline (800 -426-

4791).

 

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen t he risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline (800-

426-4791).

 

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lea d in drinking water is primarily from materials and components associated with service lines and home plumbing. Hookerton is responsible for providing high quality drinking water but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline or at http://www.epa.gov/safewater/lead.

.

The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water include microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife; inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming; pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses; organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations,

urban storm water runoff, and septic systems; and radioactive contaminants, which can be naturally-occurring or be the result of oil and gas production and mining activities.

 

In order to ensure that tap water is safe to drink, EPA prescribes regulations which limit the number of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water, which must provide the same protection for public health.

 

When You Turn on Your Tap, Consider the Source

 

The water that is used by this system is ground water from wells throughout the system.

 

Source Water Assessment Program (SWAP) Results

 

 

The North Carolina Department of Environment and Natural Resources (DENR), Public Water Supply (PWS) Section, Source Water Assessment Program (SWAP) conducted assessments for all drinking water sources across North Carolina. The purpose of the assessments was to determine the susceptibility of each drinking water source (well or surface water intake) to Potential Contaminant Sources (PCSs). The results of the assessment are available in SWAP Assessment Reports that include maps, background information and a relative susceptibility rating of Higher, Moderate or Lower.

 

The relative susceptibility rating of each source for Hookerton was determined by combining the contaminant rating (number and location of PCSs within the assessment area) and the inherent vulnerability rating (i.e., characteristics or existing conditions of the well or watershed and its delineated assessment area). The assessment findings are summarized in the table below:

 

 

Susceptibility of Sources to Potential Contaminant Sources (PCSs)

 

Source Name

Susceptibility

Rating

SWAP Report Date

Water Tank Well-Well # 2

Lower

2017

 

The complete SWAP Assessment report for Hookerton may be viewed on the Web at:  www.ncwater.org/pws/swap. Note that because SWAP results and reports are periodically updated by the PWS Section, the results available on this web site may differ from the results that were available at the time this CCR was prepared. If you are unable to access your SWAP report on the web, you may mail a written request for a printed copy to: Source Water Assessment Program – Report Request, 1634 Mail Service Center, Raleigh, NC 27699-1634, or email requests to swap@ncdenr.gov. Please indicate your system name, number, and provide your name, mailing address and phone number. If you have any questions about the SWAP report please contact the Source Water Assessment staff by phone at 919-707-9098.

 

It is important to understand that a susceptibility rating of “higher”  does not imply poor water quality, only the system’s potential

to become contaminated by PCSs in the assessment area.

 

Help Protect Your Source Water

 

Protection of drinking water is everyone’s responsibility. We have implemented the following source water protection actions : You can help protect your community’s drinking water source(s) in several ways: (examples: dispose of chemicals properly; take used motor oil to a recycling center, volunteer in your community to participate in group efforts to protect your source, etc .).

 

 

 

Water Quality Data Tables of Detected Contaminants

We routinely monitor for over 150 contaminants in your drinking water according to Federal and State laws. The tables below list all the drinking water contaminants that we detected in the last round of sampling for each particular contaminant group. The presence of contaminants does not necessarily indicate that water poses a health risk.  Unless otherwise noted, the data presented in this table is from testing done January 1 through December 31, 2018. The EPA and the State allow us to monitor for certain contaminants less than once per year because the concentrations of these contaminants are not expected to vary significantly from year to year. Some of the data, though representative of the water quality, is more than one year old.

 

Unregulated contaminants are those for which EPA has not established drinking water standards. The purpose of unregulated contaminant monitoring is to assist EPA in determining the occurrence of unregulated contaminants in drinking water and whether future regulations are warranted.

 

Important Drinking Water Definitions:

 

 

Action Level (AL) - The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

 

Treatment Technique (TT) - A required process intended to reduce the level of a contaminant in drinking water.

 

Maximum Residual Disinfection Level (MRDL) – The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

 

Maximum Residual Disinfection Level Goal (MRDLG) – The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

 

Locational Running Annual Average (LRAA) – The average of sample analytical results for samples taken at a particular monitoring location during the previous four calendar quarters under the Stage 2 Disinfectants and Disinfection Byproducts Rule.

 

Level 1 Assessment -  A Level 1 assessment is a study of the water system to identify potential problems and determine (if possible)

why total coliform bacteria have been found in our water system.

 

Level 2 Assessment - A Level 2 assessment is a very detailed study of the water system to identify potential problems and

determine (if possible) why an E. coli MCL violation has occurred and/or why total coliform bacteria have been found in our water system on multiple occasions.

 

Maximum Contaminant Level (MCL) - The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

 

Maximum Contaminant Level Goal (MCLG) - The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

 

 

Tables of Detected Contaminants

 

 

Inorganic Contaminants

 

Contamina nt (units)

 

Sample

Date

 

MCL Violation Y/N

 

Your

Water

Range

 

Low

High

 

 

MCLG

 

 

MCL

 

 

Likely Source of Contamination

 

Fluoride

(ppm)

 

 

9/22/16

 

 

N

 

 

0.30

 

 

N/A

 

 

4

 

 

4

Erosion of natural deposits; water additive which promotes strong teeth; discharge from fertilizer and aluminum factories

 

Radioactive Contaminants

 

Contaminant

(units)

 

Sample

Date

MCL Violati on

Y/N

 

Your

Water

 

 

MCLG

 

 

MCL

 

 

Likely Source of Contamination

Beta/photon emitters (pCi/L)

9/16/13

N

9.0

0

50 *

Decay of natural and man-made deposits

 

Lead and Copper Contaminants

Contaminant

(units)

 

Sample

Date

 

Your

Water

# of sites found above the AL

 

MCL G

 

MCL

 

Likely Source of Contamination

 

Copper (ppm) (90th percentile)

 

9/27/17

 

0.542

 

0

 

1.3

 

AL=1.3

Corrosion of household plumbing systems; erosion of natural deposits; leaching from wood preservatives

 

Lead (ppb)

(90th percentile)

 

 

9/27/17

 

 

0.009

 

 

0

 

 

0

 

 

AL=15

 

Corrosion of household plumbing systems, erosion of natural deposits

 

 

Disinfectant Residuals Summary

 

 

 

Year

Sampled

 

MRDL Violation Y/N

 

Your

Water

(highest RAA)

 

Range

 

Low        High

 

 

MRDLG

 

 

MRDL

 

 

Likely Source of Contamination

 

Chlorine (ppm)

 

2018

 

N

 

0.40

 

0.26 – 0.69

 

4

 

4.0

Water additive used to control microbes

 

Stage 2 Disinfection Byproduct Compliance - Based upon Locational Running Annual Average (LRAA)

 

Disinfection

Byproduct

 

Year

Sampled

 

MCL Violation Y/N

Your

Water

(highest LRAA)

Range

 

Low         High

 

MCLG

 

MCL

 

Likely Source of

Contamination

 

TTHM (ppb)

2018

 

 

 

 

N/A

 

80

 

Byproduct of drinking water disinfection

Location B01

2018

N

16.0

N/A

 

 

 

 

HAA5 (ppb)

 

 

 

 

 

N/A

 

60

 

Byproduct of drinking water disinfection

Location B01

2018

N

0.0

N/A

 

 

 

 

 

 

For TTHM: Some people who drink water containing trihalomethanes in excess of the MCL over many years may experience problems with their liver, kidneys, or central nervous systems, and may have an increased risk of getting cancer.

 

For HAA5: Some people who drink water containing haloacetic acids in excess of the MCL over many years may have an increased risk of getting cancer.

 

 

Other Miscellaneous Water Characteristics Contaminants Disinfectants and Disinfection Byproducts Contaminants

 

Contaminant (units)

 

Sample Date

 

Your

Water

 

Range

Low/High

 

SMCL

 

Sodium (ppm)

 

922/16

 

82.3

 

N/A

 

N/A

 

pH

 

9/22/16

 

8.04

 

N/A

 

6.5 to 8.5